+86-173-0318-1768
Impact-resistant Modular Rubber Screen Panels for Primary Screening
You are here: Home » Products » Rubber Screen Panels » Install with Hold-Downs » Impact-resistant Modular Rubber Screen Panels for Primary Screening

Product Category

Contact Us

WhatsApp: +86-173-0318-1768
Tel: +86-173-0318-1768
E-mail: 
Add: Wencheng Industrial Zone, Jing County, Hengshui City, Hebei Province
 

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
sharethis sharing button

Impact-resistant Modular Rubber Screen Panels for Primary Screening

Strudex impact-resistant modular rubber screen panels are designed for coarse mineral screening, where a resilient surface and supported panel construction work together. Rubber bonded to a steel support plate provides a practical combination of impact cushioning and structural support. The panels are offered in 610 × 590 mm and 610 × 610 mm formats for selection against the installed deck and hold-down arrangement.

  • Rubber screening surface for large-particle impact and sliding abrasion.
  • Steel support plate bonded to the rubber body.
  • Two defined panel footprints for replacement planning.
  • Specify aperture layout, thickness and attachment geometry for the coarse-screening duty.
Availability:
Quantity:

Strudex primary-screening panels combine a resilient rubber working face with a bonded steel support plate. The rubber handles direct impact and sliding contact, while the plate contributes support to the panel section. The 610 × 590 mm and 610 × 610 mm formats provide two distinct module envelopes for coarse mineral screening, with the aperture layout and hold-down interface defined for the installed deck.

Technical Parameters

ParameterSpecification
Screening materialResilient rubber compound
Supporting elementSteel support plate
ConstructionRubber bonded to steel support plate
Panel footprint options610 × 590 mm / 610 × 610 mm
Panel arrangementModular rubber screen panels
Fixing categoryHold-down installation
ApplicationPrimary and coarse mineral screening

A composite panel shares the duty between two materials

The value of this construction lies in the different roles of rubber and steel. A rubber surface can deform under particle contact and recover as loading changes. A supporting plate contributes structure beneath that wearing surface. Joining them creates a panel whose working response depends on the rubber, the plate, their bonded interface and the bearing arrangement below it. It should therefore be specified as a complete component.

Element of the panelWorking roleWhat establishes a suitable configuration
Rubber faceReceives the rock strike and subsequent abrasive travel.Compound response and section around the openings should correspond to particle size, shape and contact concentration. A surface can remain thick while aperture edges wear enough to affect separation.
Steel support plateContributes support to the rubber panel section.Plate geometry and the intended bearing locations need to correspond to the screen. A bonded plate does not by itself establish an unrestricted span or a permissible maximum rock load.
Bonded interfaceConnects the working rubber to its supporting element.The agreed construction and any required acceptance evidence belong in the product specification. Accessible edges can be inspected for damage, but a clean-looking edge does not prove the bond condition throughout the component.
Hold-down contactRetains the component on the deck.The complete build and clamping locations should match the panel and adjacent sections. Correct seating helps preserve the intended surface without forcing a mismatched panel into position.

Choose the coarse-screening geometry with the load

Coarse screening combines a structural task with a separation task. The panel must receive larger particles while allowing the required undersize to leave through its openings. More solid material can support the working section, but it also changes the space available for passage. The useful configuration balances that contact duty with the product requirement instead of selecting the heaviest-looking board independently of the aperture pattern.

  • Initial impact: identify the credible top size, drop height and point of first contact. These describe the severity and concentration of loading. A high average production rate and a concentrated stream are different conditions, even where the same tonnage eventually crosses the deck.
  • Travel across the face: include mineral abrasiveness, particle shape and the amount of near-size material. Repeated sliding contact consumes webs and aperture edges. Their condition matters to the separated product as well as to the remaining life of the rubber face.
  • Support below the face: show where the component bears and how it is retained. The supporting plate must work with the actual structure rather than bridge an unplanned gap. This is especially important when replacing a panel after recurring damage at one location.

Keep the two footprints separate

The 610 × 590 mm and 610 × 610 mm footprints differ in the envelope that must sit between the surrounding components. They should remain separate drawing and stock references. The common dimension does not establish identical joint positions or clamping contact. Check thickness, edges, plate arrangement and fixing interface with the footprint so the ordered module preserves the complete installed geometry.

Process requirementHow it affects the panel choice
Preserve the required undersizeDefine opening dimensions, shape and orientation together with the material’s particle shape. A nominal opening alone does not describe a complete separation result.
Keep useful openings exposedRelate the aperture fields to supports, bed coverage and blockage. Gross panel area can overstate the area actually available to pass material.
Control coarse bypassKeep joints, panel edges and retention in the acceptance scope. Material passing through an unintended gap is different from passage through the selected opening.
Renew a consumed sectionIdentify whether the limiting feature is rubber wear, opening enlargement, bond damage or the connection. This defines the required replacement scope more accurately than calling every removed part a worn panel.

Define useful service by the component and its product

Rubber flexibility can assist the release of some lodged near-size particles, but clay coating and poor distribution create different restrictions. At the other end of service, enlarged openings can change grading while the board remains mechanically intact. The panel should therefore be judged by useful separation and a sound composite assembly, with surface loss, interface damage and retention observations kept distinct.

  1. Retain new-panel dimensions at the agreed critical locations, especially the working openings and seating interfaces. This provides a reproducible reference for acceptance and later wear assessment.
  2. Relate concentrated damage to the feed path and underlying support. If a problem recurs at the same position, understand the local loading or connection before assuming that another identical component will remove the cause.
  3. During renewal, inspect the exposed deck and retaining parts before fitting the replacement. Resolve a dimensional discrepancy through the drawings and assembly rather than altering the bonded panel to conceal an unidentified mismatch.

For the order, provide the required footprint, detailed panel and support drawings, openings, thickness and hold-down arrangement. Add the feed contact conditions and required products. Acceptance can then refer to a specific rubber-and-steel configuration, while operational evaluation addresses the actual coarse-screening task rather than an unsupported universal load or life claim.

Product FAQ

Why combine rubber with a steel support plate?
The rubber supplies a resilient working surface for impact and abrasive contact, while the plate contributes structural support. The complete panel must still bear on its intended deck locations. Review the bonded interface, supporting structure and retaining arrangement as well as the visible screening surface.
What distinguishes the two available 610 mm panel formats?
Their footprints are 610 × 590 mm and 610 × 610 mm. Confirm which belongs at the intended position, together with build height, opening pattern and hold-down geometry. The common 610 mm dimension does not establish the same seating, joint arrangement or supporting contacts.
Which signs matter when inspecting a bonded rubber panel?
Look for opening enlargement, torn webs, deep surface damage, accessible edge separation and distortion of the supporting plate. Also inspect seating and retention. Record these separately: an intact rubber surface does not establish a sound interface, and secure attachment does not establish that worn openings still meet grading.
What if a replacement will not sit correctly on its supports?
Compare the panel and screen drawings and inspect the retaining parts and deck before making alterations. Establish whether the mismatch comes from the replacement or a worn structure. Avoid forcing, drilling or cutting the bonded assembly to conceal an unidentified fit problem.
Previous: 
Next: 
+86-173-0318-1768
Wencheng Industrial Zone, Jing County, Hengshui City, Hebei Province
Manufacturer of mill liners, rubber screen panels, flotation equipment accessories and other mineral processing wear-resistant spare parts.

Quick Links

Product Category

Contact Us
Copyright © 2024 Strudex Tech Co., Ltd. All Rights Reserved. Sitemap. Support by leadong.com. Privacy Policy.