+86-173-0318-1768
Supports Customized Modular Rubber Screens for Ore Screening
You are here: Home » Products » Rubber Screen Panels » Pin Type Installation » Supports Customized Modular Rubber Screens for Ore Screening

Product Category

Contact Us

WhatsApp: +86-173-0318-1768
Tel: +86-173-0318-1768
E-mail: 
Add: Wencheng Industrial Zone, Jing County, Hengshui City, Hebei Province
 

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
sharethis sharing button

Supports Customized Modular Rubber Screens for Ore Screening

Strudex modular rubber screens give ore-processing plants a practical way to organize screening media around individual deck locations. The resilient rubber surface absorbs contact from the feed, while the modular format supports replacement of worn sections during planned maintenance. Two hardness options, 40 and 60 Shore A, allow the surface response to be considered alongside the ore and screening objective. Use the panel layout, fixing details and required openings to define the replacement.

  • Model formats: 305 × 305 mm and 305 × 610 mm.
  • 40 or 60 Shore A rubber options.
  • Modular replacement for localized wear.
  • Specify the feed characteristics and grading requirement for each deck position.
Availability:
Quantity:
  • 305x610 305x305

Strudex modular rubber screens form a configurable ore-sizing surface from individual panels. The rubber receives particle contact and presents the screening openings; the modular arrangement assigns that surface to specific deck locations. With 40 and 60 Shore A options and listed 305 × 305 mm and 305 × 610 mm formats, the panel set can be defined around the ore’s separation requirement and the different contact duties across the screen.

Technical Parameters

ParameterSpecification
Screening mediumRubber
Panel formatModular ore-screening panel
Nominal module formats305 × 305 mm / 305 × 610 mm
Rubber hardness options40 Shore A / 60 Shore A
Fixing categoryPin-type installation
Separation dutyMineral and ore screening

A panel set is a process surface, not just a quantity of spares

Material changes as it travels along a screen: the bed redistributes and some undersize leaves through the openings. The remaining material can present a different contact and separation demand farther down the deck. A modular layout is useful because the chosen panel configuration can be identified at each position. The benefit is a controlled working surface that can be renewed locally while preserving the process arrangement.

Part of the ore-sizing dutyWhat the panel configuration should prioritize
First contact with the feedEvaluate impact, top size and concentration of the incoming stream. The rubber section, opening webs and support need to suit the load at that position. The same module format can be used in different configurations, but the selected configuration must remain identifiable.
Main separation areaExpose useful openings to the undersize fraction while preserving the required product control. Opening shape, near-size content and moisture influence passage. The gross area of the deck does not show how much of it is available through unobstructed, working apertures.
Remaining near-size materialReview which particles still need an opportunity to pass. A flexible surface can assist release of lodged material, but aperture geometry and the material bed still govern access. Keep the intended cut and acceptable misplaced fraction visible when selecting a different pattern.

Use the two rubber responses deliberately

The 40 Shore A grade provides a softer option and the 60 Shore A grade a firmer one. Their useful difference belongs in a defined panel configuration. Flexibility around the openings, resistance to the particular contact mode and the supporting section all matter. The grade should be selected with the aperture pattern and local load, rather than assigned solely because the plant processes iron ore, coal or another named mineral.

  • Variable ore characteristics: different sources of the same ore can change particle shape, abrasiveness, moisture and the fraction near the target separation. Describe that range when selecting the panel. A configuration suited to the average feed should also be evaluated against the condition that regularly limits production.
  • Product requirement: preserve the required grading while reviewing material passage. A more open or differently oriented pattern can change the proportion of elongated particles entering the undersize. Improving passage is useful when it supports the plant’s intended products, not simply when more material falls through.
  • Panel support: the rubber’s response develops within the installed section and bearing arrangement. Footprint, pin geometry, build dimensions and support locations need to match. A flexible grade should not be expected to compensate for a missing support or a mechanically mismatched connection.

Build a layout that can remain consistent through renewal

The two listed footprints define module envelopes, not a universal fastening standard or a fixed open-area percentage. A useful panel schedule links each envelope to its opening pattern, grade, attachment and position. This is the technical basis for localized replacement: the renewed module restores the chosen part of the screening surface, rather than gradually changing the deck as similar-looking spares are fitted.

  1. Separate functional zones: mark the material-flow direction and the positions responsible for receiving impact, performing the main separation and dealing with remaining near-size material. Identify edges and special connections so the full assembled surface is represented.
  2. Define the actual modules: connect every configuration with the appropriate footprint, aperture pattern and rubber grade. Include the pin and support details that control seating. Where positions share a configuration, keep that common identity visible without erasing position-specific loading information.
  3. Review transitions: joints and neighboring sections should form the intended material path. A configuration change between positions should not introduce an unintended step, unsupported edge or route around the screening openings. This protects the separation as well as retention.
  4. Renew by the limiting feature: distinguish opening enlargement, torn rubber, persistent blockage and connection damage. A localized change should restore the feature that has limited service, with the surrounding support assessed before a new module is installed.

The buyer payoff is continuity of the selected process surface. A panel set that remains identifiable makes changes purposeful: the plant can revise a grade or opening at a defined position and understand what has changed. It also avoids consuming serviceable modules solely because another area wears faster. The actual renewal scope remains subject to the assembly and equipment procedure.

Judge the panel set by the separated material

ObservationSelection implication
Coarse material in the undersizeDistinguish passage through the selected geometry from enlarged openings or bypass at joints. These mechanisms lead to different corrections.
Acceptable undersize remaining in the oversizeReview exposed opening area, blockage, bed distribution and feed shape before assuming the nominal aperture is too small.
Wear following a narrow pathRelate the path to incoming material and support positions. A layout or feed-distribution issue can remain even after the rubber grade is changed.

Provide the ore characteristics and required products with a dimensioned deck or panel layout. State the 40 or 60 Shore A choice where already established, and identify any condition requiring a different review. The resulting specification should describe a reproducible set of screening modules and their roles, with quantities derived from that layout rather than from a generic request for rubber screens.

Product FAQ

Why prepare a deck map for modular ore-screening panels?
A deck map links each panel’s position to its opening pattern, rubber grade and connection. It helps crews replace a worn section while preserving the intended screening arrangement. Mark the material-flow direction and distinguish side or special positions so the stores list corresponds to the installed deck.
What should change when the plant processes a different ore blend?
Review the feed’s size distribution, particle shape, moisture, clay and abrasiveness against the existing panel configuration. A different ore name alone does not define the necessary change. Keep the required product grading visible, then assess whether openings, rubber response or loading conditions need attention.
How should spare modules be identified in the stores system?
Identify each configuration by drawing revision, footprint, opening pattern, rubber grade and fixing details. Keep installed quantities separate from reserve stock, and use consumption records by deck position to plan replenishment. Similar-looking modules should remain distinct when their openings or attachment geometry differ.
When should a module be replaced if it still looks structurally sound?
Renewal can be required when enlarged or damaged openings no longer maintain the product grading, even if the panel remains attached. Inspect aperture condition alongside torn webs, edge movement and blockage. Compare the product streams so remaining rubber thickness is not the sole replacement criterion.
Previous: 
Next: 
+86-173-0318-1768
Wencheng Industrial Zone, Jing County, Hengshui City, Hebei Province
Manufacturer of mill liners, rubber screen panels, flotation equipment accessories and other mineral processing wear-resistant spare parts.

Quick Links

Product Category

Contact Us
Copyright © 2024 Strudex Tech Co., Ltd. All Rights Reserved. Sitemap. Support by leadong.com. Privacy Policy.