+86-173-0318-1768
Pins & Sleeves for Screen Panels Installation
You are here: Home » Products » Injection Molding Products » Pins & Sleeves » Pins & Sleeves for Screen Panels Installation

Product Category

Contact Us

WhatsApp: +86-173-0318-1768
Tel: +86-173-0318-1768
E-mail: 
Add: Wencheng Industrial Zone, Jing County, Hengshui City, Hebei Province
 

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
sharethis sharing button

Pins & Sleeves for Screen Panels Installation

Strudex screen-panel installation pins use injection-molded TPU to combine a formed gripping profile with flexibility during insertion. Pins and sleeves should be identified as mating parts of the selected fastening system. Their geometry connects the panel attachment to the supporting deck, so the complete connection matters more than a pin’s visible head size.

  • Injection-molded TPU pins with gripping ribs or grooves.
  • Pin dimensions and colors can be customized.
  • Sleeve, panel and support interfaces matched to the installed assembly.

Supply references for both components when replacing an existing set, and distinguish the pin material from any separately specified sleeve material.

Availability:
Quantity:

Strudex installation pins are injection-molded TPU components for retaining screen panels. Their flexible material and molded gripping geometry allow the pin to enter the intended connection and engage with its mating surfaces. Sleeves belong to the fastening selection as separate components. The product specification should identify the pin, sleeve where used, panel attachment and supporting hole as a connected assembly.

Technical Parameters

ParameterSpecification
Component groupScreen-panel installation pins and sleeves
Pin materialTPU
Pin manufacturing processInjection molding
Pin engagement featuresMolded ribs or grooves, according to the selected design
Installation interfaceInsertion into the specified panel/deck connection
Size customizationAvailable to suit the installation
Color customizationAvailable for identification requirements

How the connection carries the panel

The screening panel rests on its designed support while the fastening arrangement controls unwanted movement and separation at the attachment points. The pin is the inserted retaining element; a sleeve, where the selected system uses one, provides a mating interface around that element. These roles explain why a correct-looking pin can perform poorly in a worn or mismatched connection. They do not establish a universal sleeve design or an expansion mechanism for every system.

Part of the interfaceFunction to establish on the assembly drawing
Pin head and seating regionLocate the installed position and the surface against which the head seats. A similar head diameter does not identify the shank or the depth of engagement.
Pin shank, ribs and groovesDefine the contact profile that retains the pin in the mating assembly. Compare the complete profile, including transitions, rather than only its largest diameter.
Sleeve, if specifiedIdentify the receiving geometry, its position and its own support. The pin and sleeve need matching references; the sleeve material is a separate specification unless expressly identified.
Panel attachment and deck holeProvide the surrounding support and the required alignment. Wear or distortion here changes the connection even when a new pin and sleeve are fitted.

Why a flexible molded pin still needs precise geometry

TPU flexibility helps the pin deform during insertion and contact the intended mating profile. Injection molding forms the head, shank and gripping details as one defined shape. The useful distinction is between controlled deformation in a matched connection and forcing the wrong geometry into a hole. A pin that stops early may have reached an obstruction or an incompatible shoulder rather than its intended seated position.

  • Insertion depth and panel thickness work together. A pin selected for a different stack of components can appear installed while leaving the gripping region in the wrong place. Check the complete installed section, including the panel attachment and any sleeve, rather than treating pin length as an isolated dimension.
  • Rib or groove form affects where contact occurs. A replacement should preserve the approved relationship between gripping surfaces and the receiving part. Selecting a larger pin to compensate for a worn hole changes that relationship and needs a reviewed connection design, rather than an assumption that greater insertion resistance means better retention.
  • Color can identify a specified part or revision when a site uses a controlled coding system. It is not an independent indication of hardness, load rating or compatibility. Keep the drawing or component reference attached to the color choice so a visual identification aid does not become the sole selection criterion.

Separate three common fastening problems

ConditionConnection-level explanation and next decision
The panel moves while the pin remains presentInspect panel support, attachment-hole wear and the actual engaged profile. A retained head does not show whether the surrounding panel and sleeve still transfer movement as intended. Identify which interface has lost its form before replacing only the pin.
The pin will not fully seatCheck alignment, trapped particles, pin revision and the thickness of the assembled parts. Stop short of treating extra force as the solution; the mating geometry must permit the defined installed position.
Damage repeats at one fixing locationCompare that position with neighboring attachments and the local feed load. A damaged support or distorted panel can repeatedly load a correctly specified pin differently from the rest of the deck.

The correct replacement scope follows the damaged interface. A sound pin cannot restore a split sleeve, and new fastening parts cannot restore a distorted support. Conversely, replacing the complete panel may be unnecessary when an identifiable fastening component is the only affected item and the approved assembly permits its renewal. Determine that scope from the connection condition and the equipment procedure.

Define the fastening set before the changeout

  1. Identify the installed set with a section view or clear photographs of the pin, sleeve and panel attachment. Mark any measured surfaces that are already worn. Capture the deck-hole geometry and installed panel thickness so the new components reproduce the intended connection rather than the worn sample.
  2. Compare the supplied references and dimensions before opening the deck for the work. Separate panel-only, pin-only and pin-and-sleeve requirements in the order. Any additional retaining element should be named on the selected assembly, rather than assumed from another manufacturer’s fastening system.
  3. Install through the equipment’s approved isolated-work procedure and verify seating at the specified attachment points. Record the actual component combination in service. This gives later movement or wear observations a mechanical reference and keeps a revised pin from being mixed with an older mating part.

For an enquiry, provide the pin and sleeve references, connection drawing, required quantities and the reason for replacement. Strudex can review the requested pin size and color against that definition. No universal screen-brand interchangeability follows from the terms pin fixing or injection molded.

Product FAQ

Which material and process are used for the pins?
The pins are injection-molded TPU components. Their flexibility and molded engagement geometry support installation in the specified connection. The material statement applies to the pins; select the sleeve and its profile as part of the matched assembly rather than assuming every component has the same construction.
What measurements are needed to identify replacement pins and sleeves?
Provide pin length, head and shank profile, sleeve internal and external geometry, panel thickness and the deck-hole dimensions. Include the number and location of fixing points. Clear photographs help identification, but the engagement dimensions and complete installed stack establish whether the replacement connection will fit.
Can a new pin correct an enlarged mounting hole?
A new pin does not restore a worn deck hole or damaged sleeve seating. Inspect the panel attachment, sleeve and supporting runner when the connection is removed. Resolve damaged mating features before fitting the replacement so the new fastener is not expected to compensate for lost support.
Can removed pins and sleeves be reused?
Reuse depends on their condition and the installation requirements for that connection. Inspect retaining ribs, shanks, heads and sleeves for wear, splits or distortion. Survival during removal is not sufficient evidence of serviceability. Keep accepted reusable parts separate from damaged returns and newly supplied fastening sets.
Previous: 
Next: 
+86-173-0318-1768
Wencheng Industrial Zone, Jing County, Hengshui City, Hebei Province
Manufacturer of mill liners, rubber screen panels, flotation equipment accessories and other mineral processing wear-resistant spare parts.

Quick Links

Product Category

Contact Us
Copyright © 2024 Strudex Tech Co., Ltd. All Rights Reserved. Sitemap. Support by leadong.com. Privacy Policy.